F/ H-Series Harnesses

*SSR 88-91 Honda Civic/ CRX. 2 point to 4 point engine wiring harness conversion (*Cores Required)

Also called a Dual to Multi Point Conversion Harness. Required when swapping on a 88-91 Civic/ CRX "DX" Model *Core Required. For D16, B16A, B17A B18, & ZC Swaps. Note: Standard harness does not include VTEC wiring so if you are going to be wiring in VTEC your self or not using a VTEC motor select standard harness conversion. If you are running a VTEC engine & would like for us to add a VTEC sub-harness for you that can be done at an additional cost by selecting swap type below.

Mil-Spec F-Series & H-Series Wiring harness

F-Series and H-series wire harnesses offer Mil-Spec Teflon coated wire with a maximum heat rating of 200°C . The Teflon coated wire is loomed with The highest quality Raychem DR-25 heat shrink covering, and adhesive lined wire junctions to keep moisture out. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a yellow identification labels for easy installation. All heavy interference circuits are protected and grounded with proper wire covering. New Harness NO Core Required

*SSR 92-95 Civic/ Del-Sol & 94-01 Integra H22A Engine Wiring Harness Conversion (*Cores Required)

This conversion will make your EG Civic or DC2 Integra compatible with a H-Series engine. *Core Required (see more details for further information).
Note: We only support Internal coil distributors on H-Series Swaps. You can install any OBD1 coil into your External coil USDM H-Series distributor with very little modification.

*SSR 96-00 Civic B-Series & H22A Engine Wiring Harness Conversion (*Cores Required)

This conversion will make your 96-00 Civic compatible with a B-Series or H-Series engine. *Core Required (see more details for further information).
Note: We only support Internal coil distributors on H-Series Swaps. You can install any OBD1 coil into your External coil USDM H-Series distributor with very little modification.

90-02 Honda Accord H22A Engine Wiring Harness Conversion (*Cores Required)

This conversion will make your Honda Accord wiring harness compatible with a H-Series engine. *Core Required (see more details for further information).