ECU Conversion Harness

SSR PreOBD chassis to OBD I ECU (Conversion Harness)

This harness allows you to adapt a JDM or US OBDI M/T ECU into an 88-91 Civic, CRX or a 90-91 Integra, OBD0 Chassis.  Our harness also includes a 3’ pigtail to simplify wiring any additional or required sensors to complete the installation. Part # CECU-008

SSR OBD2a chassis to OBD1 ECU Conversion Harness

This harness allows you to adapt a 92-95 OBD I M/T ECU into a 96-98 Civic or Del Sol, 96-99 Integra, Prelude or Accord. Part # CECU-001

SSR OBD2b chassis to OBD1 ECU Conversion Harness

This harness allows you to adapt a 92-95 OBD I M/T ECU into a 99-00 Civic, 00-01 Integra, Prelude or Accord. Part # CECU-002

SSR OBD I Jumper

 (CECU-004) – This extension harness allows you to plug into your existing harness and your OBD I ECU and add different ECU enhancers, such as SAFC’s or VAFC’s;  hence, there is no need to cut into your factory harness.

SSR OBD2B chassis to OBD2A ECU (Conversion Harrness)

SSR OBD II Jumper

 (CECU-003) - This extension harness allows you to plug into your existing harness and your OBD IIA or OBD IIB ECU and add different ECU enhancers, such as SAFC’s or VAFC’s, and there is no need to cut into your factory harness.

Zerg Industries OBD0 to OBD1 ECU Jumper Harness

This Zerg ECU harness will allow 88-91 Honda Civic / CRX, Acura Integra and other OBD0 Honda and Acura to convert over to OBD1. Converting over allows you to use the more powerful motor found in later generations of these cars. All instructions are included for installation.

Zerg Industries OBD2A to OBD1 Jumper Harness

Wired for GS-R secondaries, and all other options. Direct plug and play. This harness will allow you to run an older OBD1 M/T ECU in your newer vehicle. This Zerg Jumper harness is for the installation of the ECU only.

Zerg Industries OBD2B to OBD1 Jumper Harness

Wired for GS-R secondaries, and all other options. Direct plug and play. This harness will allow you to run an older OBD1 M/T ECU in your newer vehicle. This is for the installation of the ECU only.

Zerg Industries OBD1 to OBD2A Jumper Harness

Direct plug and play. This harness will allow you to run a OBD2A Civic or Integra ECU in your OBD1 Chassis. This jumper will work on M/T OBD2a ECUs only.

Zerg Industries OBD1 to OBD2b Jumper Harness

This harness will allow you to run a OBD2b ECU in your OBD1 Chassis. This jumper will work on M/T OBD2b ECUs only (Civic/ Integra).

OBD2A chassis to OBD2B ECU (Conversion Harrness)

OBD2B chassis to OBD2A ECU (Conversion Harness)

Skunk2 OBD1 ECU Conversion Harness

This conversion harness offers a pain free alternative for owners of 1996-2001 Honda/Acura vehicles hindered by the factory OBDII ECU.  This conversion harness, along with an OBDI ECU, will convert the vehicle to OBDI.  Simply plug one side of the harness into the OBDI ECU, and the other side to the factory engine harness.  No cutting or soldering is needed.  For optimum results, use with Skunk2 Racing modified ECU program.   FOR OFF-ROAD USE ONLY

SSR Mitsubishi EVO Harness

(CEVO-001) - This extension harness allows you to plug into your existing harness and ECU so you can add different ECU enhancers, such as SAFC’s and not cut into your factory harness.