AEM Series-2 EMS

AEM Series-2 EMS OBD1 Honda/ Acura (M/T)

AEM Series-2 EMS (Engine Management System)
for Acura Integra 92-95; and Honda Accord (4-Cyl) 90-95, Civic 92-95, Del Sol 93-95, Prelude 90-95
Manual Transmission Only
Part # 30-6040

AEM Series-2 EMS OBD2b Honda/ Acura (M/T)

AEM Series-2 EMS (Engine Management System)
for Acura CL (4-Cyl) 98-99, Integra 00-01; and Honda Accord (4-Cyl) 98-02, Civic 99-00 (Incl. Si)
Manual Transmission Only
Part # 30-6050

AEM Series-2 EMS OBD2a Honda/ Acura (M/T)

AEM Series-2 EMS (Engine Management System)
for Acura CL (4-Cyl) 1997, Integra 96-99; and Honda Accord (4-Cyl) 96-97, Civic 96-98, Del Sol 96-97, Prelude 96-00.
Manual Transmission Only
Part # 30-6060

AEM Series-2 EMS Honda S2000 00-05

AEM Series-2 EMS (Engine Management System), for Honda S2000 00-05
Part # 30-6052

AEM Series-2 EMS Honda S2000 06-08

AEM Part # 30-6053

AEM Series-2 EMS Honda /Acura w V6 J-Series Engine Swap

AEM Series-2 EMS (Engine Management System), for Honda V6 J-Motor Swap (J30, J32, J35 & J37).
Manual Transmission Only.
Part # 30-6051

AEM Series 2 EMS for 1992-1995 Civic w/K20A2 Swap

AEM Part # 30-6030

AEM SERIES-2 EMS Acura RSX 02-04 & Honda CIVIC DX/EX/LX/SI 01-05 (M/T)

AEM Series-2 EMS (Engine Management System), for Acura RSX 02-04 (Base & Type S) and Honda Civic EX/EX/LX/SI 01-05
Note: Manual Transmission Only.
Part # 30-6030

AEMnet Adapter for 30-6030 EMS

AEM Part # 30-3430

AEMnet Adapter for 30-6040, 30-6310 & 30-6311

AEM Part # 30-3431

AEMnet Adapter for 30-6050, 30-6051, 30-6052, 30-6053 & 30-6060

AEM Part # 30-3432

AEMnet Female Termination Plug

AEM Part # 35-3440-F

AEMnet Male Termination Plug

AEM Part # 35-3440-M

AEM SERIES-2 EMS Subaru IMPREZA STI 2004

AEM Series-2 EMS (Engine Management System), for Subaru Impreza STi (2.5L) 2004
Part # 30-6820

AEM SERIES-2 EMS Subaru IMPREZA STI 05-06

AEM Series-2 EMS (Engine Management System), for Subaru Impreza STi (2.5L) 05-06
Part # 30-6821

AEM’s Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below. Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows™ compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. Our new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition.

Legal in California only for racing vehicles which may never be used upon a highway.

SERIES 2 KEY FEATURES

  
 Plugs directly into the factory harness. No rewiring necessary.
 Uses all the factory sensors.
 Includes start up calibrations.
 System is fully enabled and unlocked - Never pay for upgrades!
 Context sensitive help eases tuning process.
 Maps can be password protected by the tuner to prevent unauthorized usage or sharing.
 Runs on Windows-compatible software.
 Up to 12 peak and hold injector drivers.
 Up to 8 direct-fire coil outputs.
 Up to 16 general-purpose outputs.
 Up to 8 definable switch inputs.
 Up to 4 EGT inputs with fuel trim.
 1MB of internal data logging.
 Electronic boost control.
 Full idle control.
 Programmable traction control.
 Software definable knock control.
 Two step launch control.
 User configurable soft-cut rev limiters.
 Wet or dry nitrous control.
 Tune using new USB communication port or serial port.
 Works with all AEM gauges.

AEMTUNER SOFTWARE FEATURES

 


 Support Pane gives tuners context sensitive help and uses tuners’ actual calibrations to describe each function.
 Maps can be password protected by the tuner to prevent unauthorized usage or sharing.
 Internal conflict detection notifies tuner if obvious errors exist in assignment of inputs/outputs.
 Compare Calibrations allows tuners to graphically compare tables and maps for easy analysis.
 Workspaces are easily customizable and configurable.
 Colored tables and maps.
 Data analysis using AEMdata software. Click HERE for more info on AEMdata!


To Learn More About AEMTUNER click here.
To download the latest version of AEMTUNER software click here
 

WARNING!

Use this system with EXTREME caution! The AEM EMS System allows for total flexibility in engine tuning, however misuse of this product can lead to major engine/vehicle damage. If you are not well versed in engine dynamics and the tuning of management systems or are not PC literate, please do not attempt installation/tuning of this product. For technical assistance, please visit our forum at or visit our dealer locater for a Factory Trained tuner near you.

NOTE: AEM holds no responsibility for any engine damage that results from the misuse of this product!

Other Application (not listed) are available. Please contact us for pricing and availability.