90-93 Acura Integra DA H22A Swap

What You Will Need:

 

 

  • H22A M/T Intermediate Shaft

 

 

  • H22A Motor and Manual Transmission

 

 

  • H-Series OBD1 ECU (p13) or Other Appropriately Programmed OBD1 ECU

 

  • 94-97 Accord Shifter Cables & Shifter Box or 93-95 Prelude Shifter Cables & Shifter Box

 

  • 98 Prelude Throttle Cable

 

 

  • Cable-Style Vehicle Speed Sensor (VSS)

 

  • Rear Engine Mount Bracket from 93-95 Prelude VTEC

 

  • Modified Accord, Prelude, or aftermarket crank pulley

 

  • 90-93 Accord Lower Radiator Hose or 94-96 Prelude VTEC Lower Radiator hose

 

  • Recommended Innovative Mounts Alternator Relocation Bracket Part # 59185

 

  • Alternator Belt (Gates Part No K030310 w Relocation Bracket)

 

 

  • Recommended Half size 92-00 Honda Civic Radiator 

 

Tools:

 

  • Metric Socket set 8mm – 19mm
  • 32mm Socket
  • 3/8” Short, Medium & Long Extension
  • 10mm Line Wrench, 10mm
  • 12mm, 14mm, 17mm, 19mm & 22mm Open-end Wrenches
  • Die Grinder with Cut-off Wheel & Sanding Disk
  • Sawzall
  • Drill with Spot Removal Bit, 2.0” Hole Saw
  • Hammer 
  • Pry-bar, Roll-Pin Punch Set
  • Needle-Nose Pliers
  • Hose-Clamp Pliers
  • Marker
  • Stud Extractor
  • MIG or TIG Welder